EPAMOULD 785 A 15

EPAMOULD 785 A 15 is a polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, superior resistance to hydrolysis and microbial attack, flexibility at low temperature and high crystallisation rate.
We recommend using EPAMOULD 785 A 15 for injection molding processes, such as production of technical parts.

Property	Norm	Value	Unit
Hardness (5 sec.)	ISO 7619 ASTM D 2240	1,11	Shore A Shore A
Hardness (5 sec.)	ISO 7619 ASTM D 2240	84	Shore D Shore D
Tensile stress at 50% elongation	EN 527-1 ASTM D 412	4,6	MPa psi
Tensile stress at 100% elongation	EN 527-1 ASTM D 412	5,7	MPa psi
Tensile stress at 300% elongation	EN 527-1 ASTM D 412	10,0	MPa psi
Tensile strength	EN 527-1 ASTM D 412	40	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	500	% %
Tear strength	ISO 34-1; B ASTM D 624	85	N/mm pli
Abrasion	ISO 4649 ISO 4649	40	mm³ mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 785 A 15 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 70 - 80°C in a desiccant dryer.