We recommend using EPAMET 50 D GRS for injection molding processes, such as production of footwear components and technical parts.
GRS: It contains 100% of recycled material, according to GRS (Global Recycle Standard) definitions and guidelines.
| Property | Norm | Value | Unit |
|---|---|---|---|
| Hardness (5 sec.) | ISO 7619 ASTM D 2240 | 48 | Shore D Shore D |
| Tensile strength | EN 527-1 ASTM D 412 | 40 | MPa psi |
| Elongation @ break | EN 527-1 ASTM D 412 | 400 | % % |
| Tear strength | ISO 34-1; B ASTM D 624 | 115 | N/mm pli |
| Abrasion | ISO 4649 ISO 4649 | 70 | mm³ mm³ |
Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.