EPALINE 350 D 55 25 AU HS

EPALINE 350 D 55 25 AU HS is a polyester based thermoplastic polyurethane with good physical properties, resistance to oils and greases, improved hydrolysis resistance and enhanced protection against effects of UV-rays.
We recommend using EPALINE 350 D 55 25 AU HS in extrusion processes, such as production of tubes and profiles. It can also be used for injection molding.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,23	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	97	Shore A Shore A
Hardness (5 sec.)	ISO 7619 ASTM D 2240	54	Shore D Shore D
Tensile strength	EN 527-1 ASTM D 412	50	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	400	% %
Tear strength	ISO 34-1; B ASTM D 624	170	N/mm pli
Abrasion	ISO 4649 ISO 4649	35	mm³ mm³
MFI rate 210°C / 5 kg	ISO 1133 ISO 1133	10	g/10min g/10min

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPALINE 350 D 55 25 AU HS is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 100 - 110°C in a desiccant dryer.