EPALINE 790 A 15 15

EPALINE 790 A 15 15 is a polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, superior resistance to hydrolysis and microbial attack, very good low temperature flexibility and wear resistance.
We recommend using EPALINE 790 A 15 15 in extrusion processes, such as production of hoses, tubes, cables and 3D filaments. It can also be used for injection molding.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,11 1,11	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	90 90	Shore A Shore A
Tensile stress at 50% elongation	EN 527-1 ASTM D 412	1100	MPa psi
Tensile stress at 100% elongation	EN 527-1 ASTM D 412	9,5 1350	MPa psi
Tensile stress at 300% elongation	EN 527-1 ASTM D 412	22,5 2500	MPa psi
Tensile strength	EN 527-1 ASTM D 412	50 4700	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	500 500	% %
Tear strength	ISO 34-1; B ASTM D 624	100 500	N/mm pli
Abrasion	ISO 4649 ISO 4649	30 35	mm³ mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPALINE 790 A 15 15 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 180 - 195°F in a desiccant dryer.