EPAMOULD 285 A 10

EPAMOULD 285 A 10 is a polyester based thermoplastic polyurethane suitable for production of solvent borne adhesives, with excellent physical and mechanical properties, high crystallisation rate, improved hydrolysis resistance and resistance to oils and greases
We recommend using EPAMOULD 285 A 10 for injection molding processes, such as production of technical parts. It can also be used for extrusion of timing belts.

Property	Norm	Value	Unit
Density	ASTM D 792	1.19	g/cm³
Hardness (5 sec.)	ASTM D 2240	84	Shore A
Tensile stress at 50% elongation	ASTM D 412	4.6	psi psi
Tensile stress at 100% elongation	ASTM D 412	5.4	psi psi
Tensile stress at 300% elongation	ASTM D 412	11.2	psi psi
Tensile strength	ASTM D 412	45	psi psi
Elongation @ break	ASTM D 412	570	% %
Tear strength	ASTM D 624	110	pli pli
Abrasion	ISO 4649	35	mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 285 A 10 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 180 - 195°F in a desiccant dryer.