EPAMOULD 175 A 56

EPAMOULD 175 A 56 is a plasticized, polyester based thermoplastic polyurethane based, with flexibility at low temperature, good physical properties, perfect adhesion with most PU systems and very short cycle times
We recommend using EPAMOULD 175 A 56 for injection molding processes, such as production of technical parts and footwear components. .

Property	Norm	Value	Unit
Density	ASTM D 792	1,20	g/cm³
Hardness (5 sec.)	ASTM D 2240	79	Shore A
Tensile strength	ASTM D 412	30	psi psi
Elongation @ break	ASTM D 412	700	% %
Tear strength	ASTM D 624	75	pli pli
Abrasion	ISO 4649	60	mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 175 A 56 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 160 - 180°F in a desiccant dryer.