EPAMOULD 192 A 51

EPAMOULD 192 A 51 is a polyester based thermoplastic polyurethane with resistance to oils and greases, wear resistance, light and good physical properties.
We recommend using EPAMOULD 192 A 51 for injection molding processes, such as production of technical parts and footwear components.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,24	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	90	Shore A Shore A
Tensile stress at 50% elongation	EN 527-1 ASTM D 412	6,8	MPa psi
Tensile stress at 100% elongation	EN 527-1 ASTM D 412	7,7	MPa psi
Tensile stress at 300% elongation	EN 527-1 ASTM D 412	13,8	MPa psi
Tensile strength	EN 527-1 ASTM D 412	45	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	550	% %
Tear strength	ISO 34-1; B ASTM D 624	110	N/mm pli
Abrasion	ISO 4649 ISO 4649	30	mm³ mm³

Material preparation

EPAMOULD 192 A 51 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 80 - 90°C in a desiccant dryer.