EPAMOULD 765 D 15

EPAMOULD 765 D 15 is a polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, superior resistance to hydrolysis and microbial attack, high crystallisation rate and good physical properties.
We recommend using EPAMOULD 765 D 15 for injection molding processes, such as production of technical parts.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,19	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	63	Shore D Shore D
Tensile strength	EN 527-1 ASTM D 412	50	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	300	% %
Tear strength	ISO 34-1; B ASTM D 624	165	N/mm pli
Abrasion	ISO 4649 ISO 4649	50	mm³ mm³
MFI rate 215°C / 5 kg	ISO 1133 ISO 1133	20	g/10min g/10min

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 765 D 15 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 100 - 110°C in a desiccant dryer.