EPALINE 788 A 15 20 AU DP V1 

EPALINE 788 A 15 20 AU DP V1  is a UV-stabilized polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, superior resistance to hydrolysis and microbial attack, very good low temperature flexibility and very good wear resistance.
We recommend using EPALINE 788 A 15 20 AU DP V1  in extrusion processes, such as production of profiles, cables and conveyor belts. It can also be used for injection molding.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,12	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	88	Shore A Shore A
Tensile strength	EN 527-1 ASTM D 412	40	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	450	% %
Tear strength	ISO 34-1; B ASTM D 624	100	N/mm pli
Abrasion	ISO 4649 ISO 4649	30	mm³ mm³
MFI rate 205°C / 5 kg	ISO 1133 ISO 1133	20	g/10min g/10min

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPALINE 788 A 15 20 AU DP V1  is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 80 - 90°C in a desiccant dryer.