EPAMOULD 164 A 56 V4OP

EPAMOULD 164 A 56 V4OP is a plasticized, polyester based antistatic thermoplastic polyurethane, with good physical properties, resistance to oils and greases and perfect adhesion with most PU systems.
We recommend using EPAMOULD 164 A 56 V4OP for injection molding processes, such as production of footwear components and technical parts.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1.22	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	69	Shore A Shore A
Tensile stress at 50% elongation	EN 527-1 ASTM D 412	2.6	MPa psi
Tensile stress at 100% elongation	EN 527-1 ASTM D 412	3.4	MPa psi
Tensile stress at 300% elongation	EN 527-1 ASTM D 412	7.1	MPa psi
Tensile strength	EN 527-1 ASTM D 412	14	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	550	% %
Tear strength	ISO 34-1; B ASTM D 624	35	N/mm pli
Abrasion	ISO 4649 ISO 4649	50	mm³ mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 164 A 56 V4OP is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 60 - 70°C in a desiccant dryer.