EPAMOULD 260 A 56

EPAMOULD 260 A 56 is a plasticized, polyester based thermoplastic polyurethane based, with excellent physical and mechanical properties, resistance to oils and greases, improved hydrolysis resistance, high crystallisation rate and very good wear resistance.
We recommend using EPAMOULD 260 A 56 for injection molding processes, such as production of technical parts.

Property	Norm	Value	Unit
Density	ISO 1183-1 ASTM D 792	1,18 1,18	g/cm³ g/cm³
Hardness (5 sec.)	ISO 7619 ASTM D 2240	66	Shore A Shore A
Tensile strength	EN 527-1 ASTM D 412	30	MPa psi
Elongation @ break	EN 527-1 ASTM D 412	700	% %
Tear strength	ISO 34-1; B ASTM D 624	70	N/mm pli
Abrasion	ISO 4649 ISO 4649	45	mm³ mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPAMOULD 260 A 56 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 60 - 70°C in a desiccant dryer.